Discharge Capacity of Earth Dams Toe Drain with and without Clay Core

Document Type : Research Paper

Authors

1 Department of Water Structures Engineering, Faculty of Agriculture, Ferdowsi University of Mashhad, Iran

2 head of Water Science and Engineering Department, Faculty of Agriculture, Ferdowsi University of Mashhad, Iran

Abstract

 The objective of this study was to reduce the hydraulic gradient and consequently to weak the piping phenomenon. For this purpose, various models of geometric dimensions and hydraulic performance of clay core and toe drainage in earthen dams were investigated. Therefore, by using experimental modeling in both homogeneous and heterogeneous states, the seepage rate and the ferritic level in the earthen dam body with water level readings in seven observation wells and piezometric pressure measurement in 30 piezometers installed on the channel wall have been examined. Accordingly, three dimensionless ratios  with three heights (0.12, 0.20 and 0.28 m) at different angles (45, 60 and 90 degrees) were chosen to evaluate the performance and provide the optimal index  in the toes drainage design of earthen dams. Then the results of PLAXIS numerical model were validated by experimental data through calibration parameter and P-VALUE and RMSE statistical tests. The results showed that the optimal geometric dimensions of toe drainage due to direct relationship of reservoir water level with the position of the ferriatic line and its exit from the lower slope of homogeneous and heterogeneous earth dams are directly related to hydraulic conductivity and water level in the reservoir. In heterogeneous earthen dams, these values ​​are inversely related to the thickness of the clay core. By comparing and using regression analysis, an equation was proposed to predict the drain height of the homogeneous dam, which is more accurate for larger values of . Finally, the toe drainage size of homogeneous earth dam with an angle of 45 degrees and index of  and in heterogeneous state, the angle of 45 degrees with index of  have been reported as the optimal state.

Keywords

Main Subjects


Akhtarpour, A., and Salari, M. (2017).  Numerical simulation of the behavior of a long pebble barrier with regard to the particle fracture phenomenon. Civil Engineering. 56-47. (in Farsi)
Borja, R. I., and Kishnani, S. S. (1991). On the solution of elliptic free-boundary problems via Newton's method. Computer Methods in Applied Mechanics and Engineering88(3), 341-361.
Chahar, B. R. (2006). Closure to “Determination of Length of a Horizontal Drain in Homogeneous Earth Dams” by Bhagu R. Chahar. Journal of irrigation and drainage engineering132(1), 89-90.
Creager W. P., Justin, J. D., and Hinds. (1944). Earth, rock-fill steel and timber dams. J. Eng. for dams. V III, Wiley, New York.
Darbandi, M., Torabi, S. O., Saadat, M., Daghighi, Y., and Jarrahbashi, D. (2007). A moving‐mesh finite‐volume method to solve free‐surface seepage problem in arbitrary geometries. International Journal for Numerical and Analytical Methods in Geomechanics31(14), 1609-1629.
Fukuchi, T. (2018). New high-precision empirical methods for predicting the seepage discharges and free surface locations of earth dams validated by numerical analyses using the IFDM. Soils and Foundations58(2), 427-445.
Kasim, F., and Fei, W. S. (2002). Numerical parametric simulations for seepage flow behaviour through an earthfill Dam. Malaysian Journal of Civil Engineering14(1).
Kozeny, J. (1931). Grundwasserbewegung bei freiem spiegel, fluss und kanalversickerung. Wasserkraft und Wasserwirtschaft26(3), 28.
Liggett, J. A., and Liu, P. L. F. (1979). Unsteady interzonal free surface flow in porous media. Water Resources Research15(2), 240-246.
Mishra, G. C., and Parida, B. P. (2006). Earth dam with toe drain on an impervious base. International Journal of Geomechanics6(6), 379-388.
Ouria, A., and Toufigh, M. M. (2009). Application of Nelder-Mead simplex method for unconfined seepage problems. Applied Mathematical Modelling33(9), 3589-3598.
Pavlovsky, N. N. (1931). Seepage through earth dams, Instit. Gidrotekhniki i Melioratsii, Leningrad, Translated by US Corps of Engineers.
Shafai-Bajestan, M., & Albertson, M. L. (1993). Riprap criteria below pipe outlet. Journal of Hydraulic Engineering, 119(2), 181-200.
Sherard, J. L. (1963). Earth and earth-rock dams.
Singh, A. K. (2008). Analysis of flow in a horizontal toe filter. International Association for Computer Methods and Advances in Geomechanics (IACMAG), 2449-2455.
Stark, T. D., Jafari, N. H., Zhindon, J. S. L., and Baghdady, A. (2017). Unsaturated and transient seepage analysis of San Luis Dam. Journal of Geotechnical and Geoenvironmental Engineering143(2), 04016093.
Strzelecki, T. O. M. A. S. Z., and Kostecki, S. T. A. N. I. S. Ł. A. W. (2008). Seepage through dam and deformable soil medium with consolidation. Studia Geotechnica et Mechanica30(3-4), 71-84.
Tahoni Sh. (2006). Implementation Principles in Earth Dam. 13th Publish. Thehran Pars Aien Institution. Tehran.
Tayfur, G., Swiatek, D., Wita, A., and Singh, V. P. (2005). Case study: Finite element method and artificial neural network models for flow through Jeziorsko earthfill dam in Poland. Journal of Hydraulic Engineering131(6), 431-440.
Wu, M., Yang, L., and Yu, T. (2013). Simulation procedure of unconfined seepage with an inner seepage face in a heterogeneous field. Science China Physics, Mechanics and Astronomy56(6), 1139-1147.
Yea, G. G., Kim, T. H., Kim, J. H., and Kim, H. Y. (2013). Rehabilitation of the core zone of an earth-fill dam. Journal of performance of constructed facilities27(4), 485-495.