@article { author = {Hajiahmadi, Amin and Ghaeini-Hessaroeyeh, Mahnaz and Khanjani, Mohammad-Javad}, title = {Flow Energy Dissipation in Vortex Drop Shaft by Tangential Inlet}, journal = {Iranian Journal of Soil and Water Research}, volume = {51}, number = {11}, pages = {2877-2888}, year = {2021}, publisher = {University of Tehran}, issn = {2008-479X}, eissn = {2423-7833}, doi = {10.22059/ijswr.2020.297334.668498}, abstract = {Vortex drop shafts, with a primary function of dissipating flow energy, are used to transfer flow from higher to lower elevations. In the present research, the physical model of the vortex drop shaft of the eastern Tehran sewage system in Iran are studied and the effects of the inflow Froude number, inlet bottom slope, and the ratio of sump depth to vertical shaft diameter on the flow energy dissipation rate are surveyed. This study was performed with Froude numbers of 1.79, 2.01, 2.18 and 2.31, the inlet bottom slopes of 0.251, 0.4, and 0.571, and the sump depth to vertical shaft diameter ratios of 0, 1, and 2. Accordingly, 36 experiments were designed. For the purpose of increasing accuracy and analysis of results, each experiment is repeated 3 times. Consequently, 108 experiments were done. The results showed that the flow energy is dissipated  in the range of 93.7% to 98.5% by changing the parameters. In addition, increasing the inflow Froude number and the sump depth to vertical shaft diameter ratio cause the reduction of the flow energy dissipation rate in the vortex drop shaft by 2.2% and 3%, respectively. Also, increasing the inlet bottom slope increases the flow energy dissipation rate by 2.4%. According to the interaction between the flow energy dissipation and the outflow Froude number, the appropriate sump depth to vertical shaft diameter ratio proposed 0.3-1.2. Furthermore, a nonlinear relationship using the variance analysis was presented to estimate the flow energy dissipation rate.}, keywords = {Drop Shaft,Vortex Flow,energy dissipation,Variance analysis}, title_fa = {استهلاک انرژی جریان در سازه ریزشی گردابی با ورودی مماسی}, abstract_fa = {سازه­ی ریزشی گردابی به­منظور انتقال جریان از رقوم بالاتر به رقوم پایین­تر به­کار می­رود. استهلاک انرژی جریان از وظایف عمده­ی این سازه­ها می­باشد. در تحقیق حاضر مدل فیزیکی سازه ریزشی گردابی فاضلاب شرق تهران (ایران) مورد بررسی قرار گرفت و میزان تاثیر پارامترهای عدد فرود جریان ورودی، شیب کف سازه ورودی و نسبت عمق چاهک به قطر شفت قائم در میزان استهلاک انرژی جریان بررسی گردید. این مطالعه با عدد فرود جریان ورودی برابر 79/1، 01/2، 18/2 و 31/2  و شیب کف سازه ورودی 251/0، 4/0 و 571/0 و نسبت عمق چاهک به قطر شفت قائم برابر 0، 1 و 2 انجام شد. به­همین منظور 36 حالت آزمایش طراحی گردید. برای افزایش دقت و آنالیز نتایج، هر آزمایش 3 بار تکرار شد. در نتیجه تعداد کل آزمایش­ها، 108 آزمایش می­باشد. نتایج نشان داد با تغییر پارامترها، انرژی جریان بین 7/93 تا 5/98 درصد مستهلک می­گردد. با افزایش عدد فرود جریان ورودی و نسبت عمق چاهک به قطر شفت قائم میزان استهلاک انرژی به­ترتیب 2/2 و 3 درصد کاهش می­یابد. همچنین با افزایش شیب کف سازه ورودی میزان استهلاک انرژی جریان 4/2 درصد افزایش می­یابد. با بررسی اثر متقابل استهلاک انرژی جریان و عدد فرود جریان خروجی، نسبت عمق چاهک به قطر شفت قائم مناسب بین 3/0 تا 2/1 پیشنهاد گردید. علاوه­براین با استفاده از تحلیل واریانس رابطه­ای غیر خطی برای تخمین میزان استهلاک انرژی جریان ارائه گردید.}, keywords_fa = {سازه ریزشی,جریان گردابی,استهلاک انرژی جریان,آنالیز واریانس}, url = {https://ijswr.ut.ac.ir/article_77864.html}, eprint = {https://ijswr.ut.ac.ir/article_77864_07acada718ffd824bdfad94bf448d2b5.pdf} }