@article { author = {Rahimi, Mina and Kamali, Payam and Rezaverdinejad, Vahid and Ebrahimian, Hamed}, title = {A Review on Different Methods for Determining Parameters of Infiltration Equations with Inverse Approach in Furrow Irrigation}, journal = {Iranian Journal of Soil and Water Research}, volume = {50}, number = {9}, pages = {2155-2170}, year = {2020}, publisher = {University of Tehran}, issn = {2008-479X}, eissn = {2423-7833}, doi = {10.22059/ijswr.2019.277469.668144}, abstract = {In order to increase the efficiency of surface irrigation systems, it is necessary to estimate the coefficients of infiltration equations with high precision. Inverse modeling is a precise method for estimating the coefficients of infiltration equations. In this research in the first step, the performance of different infiltration equations including NRCS intake families, Kostiakov, modified Kostiakov, modified Kostiakov Branch Functions, Time-Rated Intake Family and Characteristic time were evaluated and compared. Then the best infiltration equation was determined so that it could estimate the advance, recession and runoff phases with the least error. By comparing different infiltration equations, the modified Kostiakov method with a mean percentage error of 2.14, 2.99 and 2.95 was determined as the best-performance infiltration equation in advance, recession and runoff phases, respectively. In the second step, based on the optimal infiltration equation (modified Kostiakov), three commonly used software for inverse estimation of infiltration equation parameters including: WinSRFR, IPARM and SIPAR-ID were compared using field data of four furrow irrigation under corn cultivation located at the research farm of agriculture and natural resources campus of university of Tehran in 2014. The results showed that the IPARM model with mean percentage errors of  2.40, 5.87, and 2.11, respectively, in advance, recession and runoff phases had a similar performance with the WinSRFR software, but it estimated the recession phase with an error of almost two times as compared to WinSRFR. The SIPAR-ID model in estimating the infiltration equation coefficients had poor performance with the highest volatility in the coefficients values.}, keywords = {Surface irrigation,Infiltration parameters,inverse modeling}, title_fa = {مروری بر روش‌های مختلف تعیین پارامترهای معادلات نفوذ با رویکرد معکوس در آبیاری جویچه‌ای}, abstract_fa = {به منظور افزایش بازده سامانه­های آبیاری سطحی، لازم است که ضرایب معادلات نفوذ با دقت بالایی تخمین زده شوند. مدل­سازی معکوس از روش­های دقیق در برآورد ضرایب معادلات نفوذ می­باشد. در این تحقیق، در مرحله اول عملکرد معادلات مختلف نفوذ شامل خانواده نفوذ NRCS، کاستیاکف، کاستیاکف اصلاح شده، کاستیاکف اصلاح شده شاخه­ای، خانواده شدت نفوذ-زمان و زمان مشخص ارزیابی و مقایسه شدند. سپس بهترین معادله نفوذ بطوریکه که بتواند فازهای پیشروی، پسروی و رواناب را با کمترین خطا برآورد کند تعیین گردید. با مقایسه معادلات مختلف نفوذ، روش کاستیاکف اصلاح شده با متوسط درصد خطای 14/2، 99/2 و 95/2 به ترتیب در فازهای پیشروی، پسروی و رواناب، به عنوان معادله نفوذ با بهترین عملکرد تعیین شد. در مرحله دوم براساس معادله نفوذ بهینه (کاستیاکف اصلاح شده)، سه نرم­افزار متداول در برآورد معکوس پارامترهای معادله نفوذ شامل: WinSRFR، IPARM و SIPAR-ID با استفاده از داده­های میدانی چهار جویچه آبیاری تحت کشت ذرت واقع در مزرعه پژوهشی پردیس کشاورزی و منابع طبیعی دانشگاه تهران در سال 1393، مورد مقایسه قرار گرفتند. نتایج نشان داد که مدل IPARM با متوسط درصد خطای40/2، 87/5 و 11/2 به ترتیب در فازهای پیشروی، پسروی و رواناب عملکرد نسبتاً مشابهی با نرم­افزار WinSRFR داشت؛ اما فاز پسروی را با خطای تقریباً دو برابری نسبت به آن برآورد نمود. مدل SIPAR-ID نیز عملکرد ضعیف با بیشترین نوسانات در مقادیر ضرایب را نشان داد.}, keywords_fa = {آبیاری سطحی,پارامترهای نفوذ,جویچه,مدل‌سازی معکوس}, url = {https://ijswr.ut.ac.ir/article_71378.html}, eprint = {https://ijswr.ut.ac.ir/article_71378_9f53387b6d8d146f549d1c74c769a0f3.pdf} }