@article { author = {Azizian, Asghar and Shokoohi, Alireza and Amiri Tokaldany, Ebrahim}, title = {DEMs Resolution Effect on SCS Curve Number Derived through WI_CN Method Based on Saturation Excess Concept.}, journal = {Iranian Journal of Soil and Water Research}, volume = {46}, number = {2}, pages = {331-342}, year = {2015}, publisher = {University of Tehran}, issn = {2008-479X}, eissn = {2423-7833}, doi = {10.22059/ijswr.2015.55937}, abstract = {The effects of DEM resolution on the curve number values as. Based on WI_CN method is addressed in the present research. This method, due to a use of TOPMODEL’s excesses saturation concept, is considerably dependent on the topographic index and subsequently on DEM cell sizes. The results of WI_CN method application in the Kasilian watershed for different DEM cell sizes indicated that the watershed averaged curve number in DEMs with resolutions of 50 and 300 meters   amount to 59.8 and 71.8, respectively, which means when DEM resolution gets coarser the difference between WI_CN method and common methods (derived CN using GIS and RS techniques) increases. For instance the maximum differences observed between the two methods (in 50 and 300 meter cell sizes) are 8.3% and 29.9%, respectively. Therefore, when making use of the saturation excess based methods for deriving curve number raster maps, especially in ungauged watersheds, DEM resolution effects should be defined with respect to data resolution.}, keywords = {DEM Resolution,SCS Curve Number,WI_CN method,Semi distributed Model: TOPMODEL}, title_fa = {اثر ابعاد سلولی مدل‏های ارتفاعی رقومی بر متوسط شمارة منحنی به‌دست‌آمده از روش مبتنی بر تئوری مازاد رطوبت اشباع (روش WI-CN)}, abstract_fa = {هدف این تحقیق بررسی اثر توان تفکیک مدل‏های ارتفاعی رقومی (DEMs) بر مقادیر شمارة منحنی به‌دست‌آمده از روش WI-CN بود. این روش نوین به علت استفاده از مفاهیم مازاد رطوبت مدل نیمه‌توزیعی TOPMODEL به شاخص توپوگرافی و متعاقب آن مقیاس DEM استفاده‌شده وابستگی زیادی دارد. نتایج کاربرد این روش در حوضة آبریز کسیلیان به ازای ابعاد سلولی مختلف حاکی از آن بود که متوسط شمارة منحنی حوضة به‌دست‌آمده از روش مزبور در ابعاد سلولی 50 متر در حدود 8/59 و در ابعاد سلولی 300 متر در حدود 8/71 است و این بدان معناست که اختلاف بین روش WI-CN و روش‏های متداول در برآورد CN با کاهش توان تفکیک DEM (بزرگ‌شدن ابعاد سلولی) افزایش می‌یابد. مثلاً، حداکثر اختلاف بین روش WI-CN و روش‌های متداول در برآورد شمارة منحنی حوضه با استفاده از DEM با ابعاد 50 متر 3/8 درصد و در صورت استفاده از DEM با ابعاد 300 متر 9/29 درصد است. بنابراین، با توجه به افزایش اختلاف بین روش‏های مذکور در اثر افزایش ابعاد سلولی باید هنگام استفاده از روش‌های مبتنی بر رطوبت مازاد اشباع برای استخراج نقشه‌های رستری CN، به‌خصوص در حوضه‏های فاقد آمار، دقت لازم به عمل آید و تعیین بهینة آن بر اساس توان تفکیک داده‌ها صورت پذیرد.}, keywords_fa = {DEM Resolution,SCS Curve Number,WI_CN method,Semi distributed Model: TOPMODEL}, url = {https://ijswr.ut.ac.ir/article_55937.html}, eprint = {https://ijswr.ut.ac.ir/article_55937_b7fd70f6360b4d09f12508dd20b3da67.pdf} }